STANDARD SIZES for TUFNOL Epoxy Glass Fabric Laminates
|
Despatch is normally ex-stock for Grade 10G/40 items shown in BOLD. Other grades and sizes may require to be made to order. Sizes not listed may be available, subject to special order. |
SHEETS
|
Thickness |
WHOLE SHEETS |
HALF SHEETS |
|
|
Nominal Size |
Nominal Size |
|
mm |
mm |
mm |
|
0.4 |
1200 x 1200 |
1200 X 600 |
|
0.5 |
1200 x 1200 |
1200 X 600 |
|
0.8 |
1200 x 1200 |
1200 X 600 |
|
1 |
1200 x 1200 |
1200 X 600 |
|
1.6 |
1200 x 1200 |
1200 X 600 |
|
2 |
1200 x 1200 |
1200 X 600 |
|
2.5 |
1200 x 1200 |
1200 X 600 |
|
3 |
1200 x 1200 |
1200 X 600 |
|
3.2 |
1200 x 1200 |
1200 X 600 |
|
4 |
1200 x 1200 |
1200 X 600 |
|
4.8 |
1200 x 1200 |
1200 X 600 |
|
5 |
1200 x 1200 |
1200 X 600 |
|
6 |
1200 x 1200 |
1200 X 600 |
|
6.4 |
1200 x 1200 |
1200 X 600 |
|
8 |
1200 x 1200 |
1200 X 600 |
|
9.5 |
1200 x 1200 |
1200 X 600 |
|
10 |
1200 x 1200 |
1200 X 600 |
|
12 |
1200 x 1200 |
1200 X 600 |
|
12.7 |
1200 x 1200 |
1200 X 600 |
|
16 |
1200 x 1200 |
1200 X 600 |
|
19 |
1200 x 1200 |
1200 X 600 |
|
20 |
1200 x 1200 |
1200 X 600 |
|
25 |
1200 x 1200 |
1200 X 600 |
|
25.4 |
1200 x 1200 |
1200 X 600 |
|
30 |
1200 x 1200 |
1200 X 600 |
|
32 |
1200 x 1200 |
1200 X 600 |
|
35 |
1200 x 1200 |
1200 X 600 |
|
40 |
1200 x 1200 |
1200 X 600 |
|
45 |
1200 x 1200 |
1200 X 600 |
|
50 |
1200 x 1200 |
1200 X 600 |
|
55 |
1200 x 1200 |
1200 X 600 |
|
60 |
1200 x 1200 |
1200 X 600 |
|
70 |
1200 x 1200 |
1200 X 600 |
|
80 |
1200 x 1200 |
1200 X 600 |
|
90 |
1200 x 1200 |
1200 X 600 |
Other sizes up to 90mm thick can readily be made to order.
Standard sheet size is 1200 x 1200mm approximately. Sheets 1525 x 1200mm approximately can also be made to order.
Thicknesses below 1.0mm have a special matt finish.
Minimum production quantities may apply for certain items.
ROUND RODS – Grade 10G/40 only
|
Diameter |
Nominal Length |
Type |
|
mm |
mm |
|
|
6 |
1200 |
Machined from sheet |
|
8 |
1200 |
Machined from sheet |
|
10 |
1200 |
Machined from sheet |
|
12 |
1200 |
Machined from sheet |
|
12.7 |
1200 |
Rolled and moulded |
|
16 |
1200 |
Rolled and moulded |
|
19 |
1200 |
Rolled and moulded |
|
20 |
1200 |
Rolled and moulded |
|
22 |
1200 |
Rolled and moulded |
|
25 |
1200 |
Rolled and moulded |
|
25.4 |
1200 |
Rolled and moulded |
|
30 |
1200 |
Rolled and moulded |
|
32 |
1200 |
Rolled and moulded |
|
35 |
1200 |
Rolled and moulded |
|
38 |
1200 |
Rolled and moulded |
|
40 |
1200 |
Rolled and moulded |
|
45 |
1200 |
Rolled and moulded |
|
50 |
1200 |
Rolled and moulded |
|
60 |
1200 |
Rolled and moulded |
|
63.5 |
1200 |
Rolled and moulded |
|
70 |
1200 |
Rolled and moulded |
|
76 |
1200 |
Rolled and moulded |
|
80 |
1200 |
Rolled and moulded |
|
90 |
1200 |
Rolled and moulded |
Other sizes up to 90mm diameter can readily be made to order.
Standard lengths are 1200mm approximately for rods up to 105mm diameter, and 585mm long approximately for larger diameters.
Rods under 12.7mm diameter are normally machined from sheet and have flat, in-plane laminations. Rods 12.7 diameter and over are rolled and moulded individually. Rolled and moulded rods under 12.7 diameter can be made to order.
Minimum production quantities may apply for certain items.
Back to main Tufnol Epoxy Glass page
Back to Home page
A full machining service is available from Tufnol for these and many other engineering plastics and composites.
Tufnol Composites Ltd, Wellhead Lane, Perry Barr, Birmingham B42 2TB, United Kingdom.
Quality Registration BS EN ISO 9001:2000, BS EN 9100:2003 and AS 9100 Reg. No. FM 90942
The information given here is believed to be correct, but completeness and accuracy are not guaranteed. The user shall be fully responsible for determining the suitability of products for the intended use.
| Home page | Legal page | Contact us |
TUFNOL is a Registered Trade Mark.
Copyright © 2000 – 2005 Tufnol Composites Ltd. All rights reserved.
|
Site Map