STANDARD SIZES for TUFNOL Filament Wound Cylinders

Sizes not listed may be available, subject to special order.

TUBES

Standard Sizes and Compression Loads*

Metric Size Range

Inside Diameter	Outside Diameter	Wall Thickness	Cylinder Compression
mm	mm	mm	Load N
25	29	2.0	3000
32	37	2.5	4000
40	45	2.5	5000
50	56	3.0	8000
63	69	3.0	10000
80	87	3.5	16000
100	107	3.5	20000
125	133	4.0	30000
160	169	4.5	40000

Imperial Size Range

Inside Diameter	Outside Diameter	Wall Thickness	Cylinder Compression
inch	inch	inch	Load  lbf
1.00	1.16	0.080	700
1.50	1.70	0.100	1200
2.00	2.20	0.100	1600
2.50	2.74	0.120	2500
3.00	3.24	0.120	3000
4.00	4.28	0.140	5000
5.00	5.32	0.160	7000
6.00	6.36	0.180	10000
8.00	8.44	0.220	15000
10.00	10.52	0.260	22500
12.00	12.60	0.300	31000
16.00	16.76	0.380	52500

Note: Tube sizes outside our standard range can be produced and these are subject to special enquiry. Minimum production quantities may apply for certain items.

*See main FWT page

A full machining service is available from Tufnol for this and many other engineering plastics and composites.

Tufnol Composites Ltd, Wellhead Lane, Perry Barr, Birmingham B42 2TB, United Kingdom.

Quality Registration BS EN ISO 9001:2000, BS EN 9100:2003 and AS 9100 Reg. No. FM 90942

The information given here is believed to be correct, but completeness and accuracy are not guaranteed. The user shall be fully responsible for determining the suitability of products for the intended use.